Telecom Access Products

Mobile Networks

Fixed Terminal (FWP)

Technical characteristics

• 3G/2G Fixed Mobile Terminal for voice services
• LCD 128×64 backlit screen
• Work bands:
   – UMTS: 900/2100 ó 850/1900 ó 900/1900 MHz
   – GSM: 850/900/1800/1900 MHz
• SMS management
• Hands-Free
• Memory keys and speed dial
• Alarm
• Calculator
• Additional services
• Backup internal battery
• Integrated antenna or external antenna

Router 4G voice and data

Technical characteristics

• Router Multiband Multimode to access the Internet via 4G with 3G backup
• Multiband Multimode
• Radio Interface:
   – Lte FDD Cat4:150/50 Mbps (DL/UL)
   – DC-HSPA+:42/5.76 Mbps(DL/UL)
• Cell Work Bands:
   – FDD Lte: B1, B2, B3, B5, B7, B20, B28, B66
   – UMTS/DC-HSPA+ B1, B2, B5, B8
   – GSM/GPRS/EDGE: 850/900/1800/1900 MHz
   – Two internal antennae and 2 SMA connectors
• WiFi interface:
   – Access Point 802.11b/g/n; 2,4GHz
   – Two internal antennae.
• LAN & WAN Interface:
   – 4xRJ45 LAN Ethernet 10/100BT
   – 1xRJ45 WAN Ethernet 10/100BT
• WEB server for settings and management
• USB Port

Fixed Terminal (FWP)

Technical characteristics

• Industrial Range Router
• WWAN, LAN and WiFi Interfaces
• Radio Interface (WWAN) Multiband, Multimode:
   – FDD Lte Cat4 :150/50 Mbps (DL/UL)
   – DC-HSPA+:42/5.76 Mbps(DL/UL)
• Work Bands:
   – FDD Lte: B1, B2, B3, B4, B5, B7, B8, B20, B28
   – UMTS/DC-HSPA+ B1, B2, B3, B5, B8
   – GSM/GPRS/EDGE: Quadband 850/900/1800/1900 MHz
• 2xSMA to connect antennae Lte
• WiFi Interface:
   – Access Point 802.11b/g/n, 2,4GHz, 2*2 MIMO
   – 2x SMA SMA to connect antennae WiFi
• LAN Interface:
   – 2xRJ45 LAN Ethernet 10/100BT
• WEB server for settings and management

Router 4G voice and data

Technical characteristics

• Modem USB Multiband Multimode
• USB 2.0 Interfaces 
• Auto Installable
• USIM Slot, supports MicroSD hasta 64GB
• Radio Interface:
   – FDD Lte Cat. 4: 150/50 Mbps (DL/UL)
• Work Bands:
   – FDD Lte: B1, B2, B3, B4, B5, B7, B20, B28
   – UMTS/HSPA+ B1, B2, B3, B5,B8
• Data Services, application administration, etc.
• PIN management
• RNDIS
• APN auto-math

Router 4G Cat4 for exterior
Voice and Data

Technical characteristics

• Configuration in two units, ODU+IDU architecture
• ODU Unit (Outdoor Unit) transmission
• IDU Unit (Indoor Unit) integrates user’s functionalities (routing, WiFi y Voice)
• Complies with 3GPP Release 10 Cat.4
• Improve linkage capacity due to the antenna orientation to the base station that will provide the service
• Improved performance in terms of data transmission allowance up to 150 Mbps
Exterior Unit ODU:
• Work Bands:
   – Version LTE TDD: B42, B43
   – Version LTE FDD: B3, B7, B20 (Single Mode)
   – Bandwidth for LTE channels 5/10/15/20 MHz
• Cellular Interface:
   – LTE category 4
   – SIM/USIM Card 1.8V y 3V in LTE mode
   – Supports diversity in reception 1TX/2RX
   – Out power LTE 23 dBm, based in 3GPP
   – Reception sensitivity -95dBm
   – Two LTE Internal Antennae with Improvement 14dBi
• Data transmissions:
   – FDD LTE: 150/50 Mbps (DL/UL), category 4
   – TDD LTE: 120/30 Mbps (DL/UL), category 4
Interior Unit IDU :
• WiFi Interface:
   – Access Point 802.11b/g/n; 2,4 GHz
   – Two internal antennae 3dBi
   – LAN Interface o 4 x RJ45 Ethernet 10/100 auto-sensing, auto-MDI/MDIX
   – PoE Exterior Unit (ODU)
• Voice Interface (Opcional)
   – 1x RJ11 FXS port to connect the telephone
   – VoIP/VoLTE/CSFB

Router 4G Cat. 6 parted
assembly with exterior installation

Technical characteristics

• Configuration in two units, ODU+IDU architecture
• ODU Unit (Outdoor Unit) transmission
• IDU Unit (Indoor Unit) integrates the user’s functions (routing, WiFi y Voice)
• Complies with 3GPP Release10/11 Cat.6 with CA (Carrier Aggregation)
• Improves links capacity due to the antenna orientation towards the base station that will provide service
• Improved performance in terms of data transmission allowance up to 300 Mbps Exterior
Exterior Unit ODU:
• Work Bands:
   – LTE Version TDD: B42, B43
   – Band width for Channels LTE of 5/10/15/20 MHz
• Cellular Interface:
   – LTE category 6
   – Carrier Aggregation: B42+B42 ó B43+B43
   – MIMO: 2×2 & 4×4
   – End Power LTE: 23 dBm, based in 3GPP
   – Sensibility in reception: -95dBm
   – Four internal LTE antennas with Gain 11dBi
• Data transmission: o TDD LTE: 230/30 Mbps (DL/UL), category 6
Interior Unit ODU:
• Dual WiFi interface:
   – Access point 802.11b/g/n/ac; 2,4 GHz/ 5 GHz
   – Two internal antennas WiFi 2.4 GHz gain 2dBi
   – Two internal antennas WiFi 5 GHz gain 2dBi
   – Bandwidth 2.4 GHz channels 20/40 MHz
   – Frequency 5 GHz Channels 36,40,44,48
• LAN interface:
   – 2 x RJ45 Ethernet 10/100/1000 auto-sensing, auto-MDI/MDIX
   – PoE for outdoor unit ODU)
• Voice Interface (Optional):
   – 1x RJ11 FXS port for telephone connection
   – VoIP/VoLTE/CSFB

WOULD YOU LIKE MORE INFORMATION ?
You can request more information and we will be delighted to help you with everything you need

We facilitate the market transformation towards business models with industrial and technological solutions, betting for markets with a high growing potential.

Amper S.A. c/Virgilio 2 (Bldg.4) Ciudad de la Imagen PC 28223, Pozuelo de Alarcón, Madrid. Tel: +34 91 724 30 00

Tel: +34 91 724 30 00

Fax: +34 91 724 30 10

email: comunicacion@web.grupoamper.com

Legal Warning - Privacy Policy - Cookies Policy
© 2019 Amper S.A. All rights reserved

This post is also available in: Spanish